OS-BASE APRILIA TUAREG 660
OS-BASE APRILIA TUAREG 660
Designed to be a perfect fit on the APRILIA TUAREG 660 with a custom shape and specific fitting hardware. The OS-BASE is an 'over the seat harness' for mounting OS-6, OS-12, or OS-18 ADVENTURE PACKS as soft panniers, with no need for metal frames. This system provides a super-tough, lightweight carrying solution, with no bodywork alterations needed. The fitting hardware gives the flexibility to mount a one, two, or three-pack set-up, depending on your type of ride. The set-length straps make mounting quick and easy, and the custom shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount and just seconds to remove it.
BUYING OPTIONS
OS-BASE ONLY
OS-BASE COMBO 12 - OS-BASE TUAREG + (2 x OS-6 ADVENTURE PACKS)
OS-BASE COMBO 24 - OS-BASE TUAREG + (2 x OS-12 ADVENTURE PACKS)
OS-BASE COMBO 36 - OS-BASE TUAREG + (2 x OS-18 ADVENTURE PACKS)
QUICK & EASY TO FIT
Pass the lower hook strap around the main frame and back through the rear pillion footrest mount and attach the hook to the web loop.
Slide the top straps over the TUAREG ALLOY MOUNTS*
*included in the fitting kit
Pull on the top straps until the OS-BASE is firmly mounted on the seat
Fold over the loose strap ends and place them in the elastic loops.
MODIFY THE SET-UP TO SUIT YOUR RIDE
FEATURES
• Carrying capacity from 12 to 54 Litres with centre pack mounting option.
• Heavy-duty Hypalon construction.
• Reinforced stitching on all stress points.
• Aircraft grade alloy hooks.
• Non-slip cam buckles.
• Includes 2 x 120mm FRAME LOOPS
• Includes 2 x SUB-FRAME LOOPS
• Includes 2 x TUAREG ALLOY MOUNTS
• 10 YEAR GUARANTEE
WEIGHT - OS-BASE + Fitting Kit 1150g / 2.5lb
PRODUCT CODE - KOSBA-K
BODYWORK DAMAGE DISCLAIMER
Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. We strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on your motorcycle.
IMPORTANT: When using OS-12 or OS-18 PACKS, we recommend you re-hook the top strap from each OS-PACK on to the loop from the opposite side. This provides extra pack stability and improved pack clearance from the exhaust silencer.
