KRIEGA BACK PROTECTOR 1
Make a hole in the helmet front air vent. Push the white tube through from the inside
KRIEGA BACK PROTECTOR 2
KRIEGA BACK PROTECTOR 3
KRIEGA BACK PROTECTOR PACKAGING
KRIEAG 2L HYDRATION
KRIEGA 2L HYDRATION PACKAGING
KRIEAG 2L HYDRATION R15
STASH TRAVEL WALLET
stash travel wallet
HARNESS POCKET XL RIGHT
HARNESS POCKET XL LEFT
HARNESS POCKET
KUBE ORGANIZER
KUBE ORGANIZER XL
TOOL ROLL
TOOL ROLL
OS-38 SOFT PANNIER
OS-32 SOFT PANNIER
OS-22 SOFT PANNIER
KRIEGA NECK TUBE
OS-PLATFORM
OS-PLATFORM TUBE FIT
OS-PLATFORM SW-MOTECH FIT
OS-HEEL PLATES
KTM 790/890 NORDEN 901 FOOTPEG ELIMINATORS
US-5 FRONT
US-5 REAR
US-5 TAIL PACK
US-5 TANK BAG
US-5 BACKPACK ADD-ON
US-10 FRONT
US-10 REAR
US-10 TAIL PACK
US-10 TANK BAG
US-10 BACKPACK ADD-ON
US-10 COMBO
US-20 FRONT
US-20 SIDE
US-20 STRAP
US-20 REAR
US-20 TAIL PACK
US-20 TANK BAG
US-20 COMBO
US-30 FRONT
US-30 SIDE
US-30 STRAP
US-30 REAR
US-30 TAIL PACK
US-30 SHOULDER
US-20 SHOULDER
US-30 COMBO
US-DRYPACKS RANGE
US-20 tailpack US-5 tankbag
US-DRYPACKS SPEED TRIPLE / DUCATI 899
US-10 TANKBAG
US-20 DRYPACK ON TRIUMPH SPEED TRIPLE
STEP 1
STEP 2
Slide the Velcro looped tabs onto the white tube. Push the end onto the dry-break connector
STEP 3
Remove the helmet inner cheek pad. Stick the Velcro® patch to a flat area on the inside.
STEP 4
Replace the inner cheek pad and adjust the bite valve position to your liking
Note: depending on the helmet size, the white tube may need cutting down. The ideal position for the connector is as near to the helmet as possible.
KRIEGA HYDRAPAK 3 LITRE
TRAIL POCKETS
TRAIL POCKETS
OS-BOTTLE
OS-BOTTLE
ROAM 34 BLACK
ROAM 34 26 litres
ROAM 34 34 litres
ROAM 34 fleece lined pocket
ROAM HARNESS POCKET
ROAM TOOL ROLL black
ROAM TOOL ROLL ranger
ROLLPACK 20 BLACK
ROLLPACK 20 COYOTE
ROLLPACK 20 LIME
ROLLPACK 20 MULTICAM BLACK
ROLLPACK 20 ORANGE
ROLLPACK 40 BLACK
ROLLPACK 40 COYOTE
ROLLPACK 40 LIME
ROLLPACK 40 MULTICAM BLACK
ROLLPACK 40 ORANGE
